PLENARY SPEAKERS
-
![]()
Dr. Andreas Hauer is an international known expert on energy storage in general and specialized on thermal energy storage. He studied physics at the Ludwig-Maximilians-University in Munich, while he made his PhD at Technical University in Berlin. Now he is Head of the Division “Energy Storage” at the Bavarian Center for Applied Energy Research, ZAE Bayern, with about 80 employees. There, he is responsible for a number of national and international research projects focussed on thermal and electrical energy storage, thermally driven heat pumps / chillers for industrial and building applications.
For 7 years he was the secretary of the Executive Committee of the Energy Storage Programme within the International Energy Agency, IEA. At the moment he is leading working groups on “Material development for thermal energy storage” and on “Flexible sector coupling by the implementation of energy storage” within the technology network of the IEA.
He is member of the Board of directors of the International Solar Energy Society, ISES. On the national level he is member of the Board of directors of the Bundesverband Energiespeicher (BVES), German Energy Storage Association. In this position he is responsible for R&D activities within the association. -
![]()
Henrik Lund (born 2 July 1960) is a Danish engineer (M.Sc.Eng.1985) and Professor in Energy Planning at Aalborg University in Denmark. He holds a Ph.D. in Implementaion of Sustainable Energy Systems (1990), and a Dr.Techn. in Choice Awareness and Renewable Energy Systems (2009).Henrik Lund is a highly ranked world-leading researcher. He is listed among ISI Highly Cited researchers ranking him among the top 1% researchers in the world within engineering.Henrik Lund has many years of management experience as head of department for approx. 200 staff persons (1996-2002), head of section for approx. 50 persons (2014 – 2016) and head of research group of 20-30 persons (2002 – present). During his time the Sustainable Energy Planning research group at Aalborg University has now grown to approx. 30 staff members including 5 professors.Henrik Lund is Editor-in-Chief of Elsevier’s high-impact journal Energy with annual 9000+ submissions.Henrik Lund is the author of more than 500 books and articles including the book ''Renewable Energy Systems”. He is the architect behind the advanced energy system analysis software EnergyPLAN, which is a freeware used worldwide that have form the basis of more than 100 peer reviewed journal papers around the world.
KEYNOTE SPEAKERS
Luisa F. Cabeza
Petar Djinović
Claudio Gerbaldi
Halime Paksoy
Wim van Helden
PROGRAMME
with book of abstracts
Wednesday, 9 June 2021
|
9:00 - 9:50 |
Opening |
||
|
|
|||
|
9:50 - 10:35 |
Plenary
lecture Energy Storage Dr. Hauer |
||
|
10.35 - 10:45 |
Break |
||
|
10:45 - 12:50 |
Systems |
TCM materials |
TES application Keynote lecture Dr. van Helden |
|
12:50 - 14:00 |
Lunch break |
||
|
14:00 - 16:05 |
TES application |
EES materials Keynote lecture Prof.
Gerbaldi |
PCM materials |
|
16:05 - 16:15 |
Break |
||
|
16:15 - 18:40 |
Short oral/Poster TES application |
Short oral/Poster Systems |
Short oral/Post. PCM materials |
Thursday, 10 June 2021
|
9:00 - 10:30 |
TES application Keynote lecture Prof.
Cabeza |
Systems |
EES application |
|
10.25 - 10:45 |
Break |
||
|
10:45 - 12:45 |
TES application |
TCM materials |
Climate |
|
12:45 - 14:00 |
Lunch break |
||
|
14:00 - 16:00 |
TES materials PCM Keynote lecture Prof.
Paksoy |
TES sensible materials |
TES application |
|
16:05 - 16:15 |
Break |
||
|
16:15 - 18:40 |
Short oral/Poster TES application |
Short oral/Poster TCM materials |
Short oral/Poster EES/TES |
Friday, 11 June 2021
|
9:00 – 9:45 |
Plenary
lecture Systems Prof. Lund |
|||
|
9:45 - 9:50 |
Short break |
|||
|
9:50 - 10:30 |
TES application |
Systems |
NZEB |
|
|
10:30 - 10:45 |
Break |
|||
|
10:45 - 12:45 |
TES applicaton |
PCM
materials |
Systems |
|
|
13:00 - 14:00 |
Lunch |
|||
|
14:00 - 15:00 |
TES application |
P2X Keynote lecture Dr.
Djinović |
|
|
|
15.00-15.30 |
Closing |
|||
PROGRAMME
Wednesday, 9 June 2021
|
9:00 – 9:50
9:00 - 9:05 9:05 - 9:10 9:10 - 9:15 9:15 - 9:20 |
Opening
Dr. Alenka Ristić and Ass. Prof. Uroš Stritih, Organizers Prof. Mitja Kalin, dean, Faculty for Mechanical Engineering, UL Prof. Gregor Anderluh, director, National Institute of Chemistry Mr. Hinko Šolinc, MSc, general director, Directorate of EnergyMinistry of Infrastructure |
|
||||
|
9:20 - 9:35 9:35 - 9:45 |
Mr. Teun Bokhoven, President of TCP ES (#112) Ass. Prof. Uroš Stritih, Slovenian delegate at TCP ES (#163) |
|
||||
|
|
|
|
||||
|
9:50 – 10:35 |
Plenary session P1 Chairperson: |
|
||||
|
9:50 – 10:40 |
Plenary lecture (PL 1): What is the value of energy storage? Dr. Andreas Hauer ZAE Bayern, Germany |
|
||||
|
10:40 – 10:45 |
Short break |
|
||||
|
10:45 – 12:50 |
Morning
session A1 Chairperson: |
|
||||
|
10:45 – 11:10 |
Keynote lecture (#101) Thermal Energy Storage: developments and results for large scale technologies and for compact technologies Dr. Wim van Helden AEE Intec, Austria |
|
||||
|
11:10 – 11:30 |
Development and implementation of PTES in Copenhagen (#135) Mr. Christian Kok Skov Planenergi, Denmark |
|
||||
|
11:30 – 11:50 |
Simulation and performance evaluation of large-scale thermal energy storage in renewables-based district heating system (#120) Ms. Alice Tosatto University of Innsbruck, Austria |
|
||||
|
11:50 – 12:10 |
Experimental investigation on a new highly efficient regeneration process for thermochemical energy storage (#186) Dr. Henner Kerskes University of Stuttgart, Germany |
|
||||
|
12:10 – 12:30 |
Experimental results of a 182 kWh thermochemical heat storage system for domestic applications integrated in an orphanage in Warsaw (#16) Mr. Samuel Knabl AEE Intec, Austria |
|
||||
|
12:30 – 12:50 |
Coated Ca(OH)2 granules for thermochemical heat storage: real-time visualisation and analysis (#74) Mr. Aldo Cosquillo Mejia German Aerospace Center, Germany |
|
||||
|
|
|
|
||||
|
10:45 – 12:45 |
Morning
session B1
Chairperson: |
|
||||
|
10:45 – 11:05 |
Examining zeolitic imidazolate frameworks (ZIFs) for thermochemical heat storage and reallocation (#60) Dr. Ciara Byrne National Institute of Chemistry, Slovenia |
|
||||
|
11:05 – 11:25 |
SWS composites based on LiCl for sorption thermal energy storage: thermochemical and kinetic properties (#48) Dr. Andrea Frazzica CNR ITAE, Italy |
|
||||
|
11:25 – 11:45 |
Investigations on the water-adsorption characteristics of a novel composite material that couples adsorption and sensible heat storage particles (#215) Mr. Igor Rangel Correa Ferreira CEA Tech, CETHIL and INSA Lyon, France |
|
||||
|
11:45 – 12:05 |
Water composite sorbents based on gamma alumina for solar sorption heat storage (#34) Prof. Nataša Zabukovec Logar National Institute of Chemistry, Slovenia |
|
||||
|
12:05 – 12:25 |
The 4-temperatures-approach – a method to evaluate thermochemical heat storage materials under application conditions (#41) Mr. Christoph Rathgeber ZAE Bayern, Germany |
|
||||
|
12:25 – 12:45 |
Development and characterization of a LiCl based silicone foam for thermal energy storage applications (#131) Prof. Luigi Calabrese University of Messina, Italy |
|
||||
|
|
|
|
||||
|
10:45 – 12:45 |
Morning
session C1
Chairperson: |
|
||||
|
10:45 – 11:05 |
Operation and characteristics of a direct contact latent thermal energy storage (#56) Mr. Stefan Krimmel Lucerne University of Applied Sciences and Arts, Switzerland |
|
||||
|
11:05 – 11:25 |
Insulation with controllable heat transfer for thermal energy storages (#91) Ms. Jonina Felbinger German Aerospace Center, Germany |
|
||||
|
11:25 – 11:45 |
Large heat pumps with hot water store in local heating systems - Investigation of operation strategies (#58) Ms. Shengqing Xiao Chemnitz University of Technology, Germany |
|
||||
|
11:45 – 12:05 |
Vertical rock bed for high temperature energy storage: pilot plant findings (#176) Mr. Kai Knobloch Technical University of Denmark, Denmark |
|
||||
|
12:05 – 12:25 |
The IEA energy storage TCP Task 36 – a working group on Carnot Batteries (#158) Dr. Dan Bauer German Aerospace Center, Germany |
|
||||
|
12:25 – 12:45 |
Combined heat and power coal fired plants – the best choice of early grid-scale Carnot batteries applications (#174) Mr. Miroslav Rathan Czech Technical University in Prague, Czech Republic |
|
||||
|
12:45 – 13:00 |
Sponsor chat
|
|
||||
|
13:00 – 14:00 |
Lunch break
|
|
||||
|
|
|
|
||||
|
14:00 – 16:05 |
Afternoon session A2 TES applications Chairperson: |
|
||||
|
14:00 – 14:20 |
Tests with PCM in grouting of UTES borehole heat exchangers (#113) Dr. Burkhard Sanner Ubeg Dr. Mands & Sauer GbR, Germany |
|
||||
|
14:20 – 14:40 |
Integrated energy systems using phase change materials as storage medium – experience from Norwegian installations. (#137) Dr. Kirsti Midttømme Norce Norwegian Research Centre, Norway |
|
||||
|
14:40 – 15:00 |
Long-term performance of PP-HTR liners for pit thermal energy storages (#144) Prof. Gernot M. Wallner University of Linz, Austria |
|
||||
|
15:00 – 15:20 |
Design and construction of an active latent thermal energy storage system (#220) Prof. Ruth Herrero-Martín Polytechnic University of Cartagena, Spain |
|
||||
|
15:20 – 15:40
|
Design aspects for large-scale pit thermal energy storage (#99) Mr. Thomas Schmidt Solites - Steinbeis Innovation gGmbH, Germany |
|
||||
|
15:20 – 15:40 |
Utilisation of ice storage systems in Slovenia (#124) Ms. Urška Mlakar University of Ljubljana, Slovenia |
|
||||
|
|
|
|
||||
|
|
|
|
||||
|
14:00 – 16:05 |
Afternoon session B2 EES materials Chairperson: |
|
||||
|
14:00 – 14:20 |
Keynote lecture An overview on hybrid polymer electrolytes for next-gen solid-state batteries operating at ambient temperature (#175) Prof. Claudio Gerbaldi DISAT, Politecnico di Torino, Italy |
|
||||
|
14:20 – 14:40 |
Electrochemical degradation of carbon-supported gold nanoparticles (#61) Dr. Milutin Smiljanić National Institute of Chemistry, Slovenia |
|
||||
|
14:40 – 15:00 |
Unique solid carbonate-based single ion conducting block copolymer for high-voltage lithium metal batteries (#179) Mr. Gabriele Lingua DISAT, Politecnico di Torino, Italy |
|
||||
|
15:00 – 15:20 |
Development of a PCM-composite for the thermal management of Li-ion batteries (#169) Mr. Sebastian Gamisch Fraunhofer Institute for Solar Energy Systems ISE, Germany |
|
||||
|
15:20 – 15:40 |
Composite polymer membranes as electrolytes for lithium-based batteries (#188) Ms. Marisa Falco DISAT, Politecnico di Torino, Italy |
|
||||
|
15:40 – 16:00 |
Effective radial thermal conductivity measurements of cylindric battery cells based on the heat flow meter method – a method validation approach (#182) Dr. Daniel Lager AIT Austrian Institute of Technology GmbH, Austria |
|
||||
|
|
|
|
||||
|
14:00 – 16:05 |
Afternoon session C2 PCM materials Chairperson: |
|
||||
|
14:00 – 14:20 |
Nucleation behaviour in organic PCM investigated by microscopy and molecular dynamic simulation (#88) Dr. Stefanie Tafelmeier ZAE Bayern, Germany |
|
||||
|
14:20 – 14:40 |
Xylitol used as phase change material : nucleation mechanisms of the overcooling rupture by stirring (#55) Mr. Piquard Louis CEA - LITEN Grenoble, France |
|
||||
|
14:40 – 15:00 |
Electric-field induced crystallization in erythritol (#146) Dr. Jean-Luc Dauvergne CIC energiGUNE, Spain |
|
||||
|
15:00 – 15:20 |
Esters as phase change materials for latent heat storage applications: investigation and control of the polymorphic phases (#45) Ms. Rebecca Ravotti Lucerne University of Applied Sciences and Arts, Switzerland |
|
||||
|
15:20 – 15:40 |
Validation of lauric acid as PCM: study of thermal degradation under quasi-real working conditions (#173) Dr. Rocío Bayón CIEMAT-PSA, Spain |
|
||||
|
15:40 – 16:00 |
Designing PCM-polymer sheet for use in thermal management applications (#209) Dr. Nurten Şahan Çukurova University, Turkey |
|
||||
|
16:00 – 16:15 |
Participant networking / Break
|
|||||
|
|
|
|
||||
|
16:15 – 18:40 |
Short Oral-Poster session TES applications Chairperson: |
|
||||
|
16:15 – 16:21 |
Effect of residual heat recovery of Zeolite Boiler in thermochemical energy storage and transport system (#32) Dr. Shoma Fujii, University of Tokyo, Japan |
|
||||
|
16:22 – 16:28 |
Numerical analysis of air-PCM compact heat exchangers using rectangular mini-tubes for free cooling in ventilation systems (#167) Mr. Amir Abdi, KTH Royal Institute of Technology, Sweden |
|
||||
|
16:29 – 16:35 |
Application of macro-encapsulated PCM in light weight building structure for reduction of cooling energy use(#39) Mrs. Eva Zavrl, University of Ljubljana, Slovenia |
|
||||
|
16:36 – 16:42 |
Comparative performance and efficiency analysis of a latent heat storage using HDPE or erythritol for demand-side management (#183) Mrs. Lisa Deinert, Fraunhofer Institute for Environmental, Safety, and Energy Technology, Germany |
|
||||
|
16:43 – 16:49 |
Preliminary experimental study of a latent heat thermal energy storage system based on pillow plate technology (#106) Dr. Ander Rojo Hurtado, Energetic Engineering Department of The UPV/EHU, Spain |
|
||||
|
16:50 – 16:56 |
Evaluation of latent heat storage integration in a Swedish multi-family heating system (#22) Ms. Emma Nyholm Humire, KTH Royal Institute of Technology, Sweden |
|
||||
|
16:57 – 17:04 |
Design and optimization of closed-system thermochemical energy storage with surrogate models (#80) Mr. Gabriele Humbert, University of Birmingham, United Kingdom |
|
||||
|
17:04 – 17:10
|
Hybrid storage system to increase self-consumption of buildings (#187) Ms. Rebekka Köll, AEE Intec, Austria |
|
||||
|
17:11– 17:17 |
Relevance of thermochemical storage in TES field: a bibliometric study (#212) Prof. A. Inés Fernández, University of Barcelona, Spain |
|
||||
|
17:18– 17:30 |
Questions
|
|
||||
|
17:31 – 17:37 |
Numerical analysis of combined heat pump ice energy storage systems to utilize waste heat arising in nonresidential buildings (#87) Mr. Marco Griesbach, University of Bayreuth, Germany |
|
||||
|
17:38 – 17:44 |
Absorption cold storage based on partially crystallized aqueous LiBr-solution (#20) Mr. Dieter Pressl, ZAE Bayern, Germany |
|
||||
|
17:45 – 17:51 |
Development of a sensor for the detection of the charge status of ice storages (#93) Mrs. Stefanie Lott, University of Stuttgart, Germany |
|
||||
|
17:51 – 17:57 |
Experimental investigation of zeolite placed in a ventilation duct for space heating (#128) Mrs. Urška Mlakar, University of Ljubljana, Slovenia |
|
||||
|
17:58 – 18:04 |
Simulative designing of thermal high performance storages for electric bus heating (#25) Mr. Werner Kraft, German Aerospace Center, Germany |
|
||||
|
18:05 – 18:11 |
Latent thermal energy storage charging and discharging: a numerical study (#159) Mr. Mateo Kirincic, University of Rijeka, Croatia |
|
||||
|
18:11 – 18:17 |
Experimental investigation of latent heat storage integrated on top of wood stoves (#75) Dr. Alexis Sevault, SINTEF Energy Research, Norway |
|
||||
|
18:18 – 18:24 |
Impact of transient storage temperature on heat transport system design for a thermal energy storage unit in vehicle applications (#65) Mr. Frank Nees, German Aerospace Center, Germany |
|
||||
|
18:26 – 18:40 |
Questions
|
|
||||
|
|
|
|
||||
|
16:15 – 18:35 |
Short Oral-Poster session TES/EES materials Chairperson: |
|
|||||
|
16:15 – 16:21 |
Reactivity assessment of magnesium chloride and ammonia for thermochemical energy storage (#23) Ms. Saki Yoshida, Tokyo Institute of Technology, Japan |
|||||
|
16:22 – 16:28 |
Experimental performance analysis of a bench-scale NH3-SrCl2 thermochemical heat storage system (#123) Dr. Saman Nimali Gunasekara, KTH Royal Institute of Technology, Sweden |
|||||
|
16:29 – 16:35 |
Elaboration and characterization of Li4(OH)3Br-based shape stabilized composites for high temperature thermal energy storage (#100) Ms. Imane Mahroug, CIC energiGUNE, Spain |
|||||
|
16:36 – 16:42 |
Modeling and validation of the dehydration process for thermochemical energy storage using reaction rate equations (#206) Ms. Ayeshah Alawadhi, University of Colorado – Boulder, United States |
|||||
|
16:43 – 16:49 |
Evaluation of ad/desorption dynamics of S-PEEK/Zeolite composite coatings by T-LTJ method (#133) Mr. Davide Palamara, University of Messina, Italy |
|||||
|
16:50 – 16:56 |
Canadian natural zeolites as stable host matrices for low-cost, high-performance composite thermochemical energy storage materials (#201) Mr. Dylan Bardy, Natural Resources Canada, Canada |
|||||
|
16:57 – 17:04 |
Processing salt-hydrates to thermochemical storage composite materials (#132) Ms. Gayaneh Issayan, University of Applied Sciences Upper Austria, Austria |
|||||
|
17:05 – 17:11
|
Tailoring water adsorption capacity of aluminophosphate AlPO4-34 (#62) Dr. Alenka Ristić, National Institute of Chemistry, Slovenia |
|||||
|
Poster
|
Thermochemical water-sorption materials screening for thermal energy storage: building application (#205) Ms. Anabel Palacios Trujillo, University of Birmingham, United Kingdom |
|||||
|
17:12– 17:22 |
Questions
|
|||||
|
17:23 – 17:29 |
Cheap and easily processable electrodes and polymer electrolytes for sodium-based batteries (#181) Dr. Giuseppina Meligrana, DISAT, Politecnico di Torino, Italy |
|||||
|
17:30 – 17:36 |
Overview on CSP systems and current advanced technologies used as storage media (#189) Dr. Helena Navarro, University of Birmingham, United Kingdom |
|||||
|
17:37 – 17:44 |
Speed of reaching the full potential heat capacity of a basalt product: Mathematical model based on experimental results (#218) Mrs. Karin Edel, Czech Technical University in Prague, Czech Republic |
|||||
|
17:45 – 17:51 |
Systematic characterization of various filler configurations for application in molten salt under similar conditions with water (#145) Mr. Julius Weiss, Fraunhofer Institute for Solar Energy Systems ISE, Germany |
|||||
|
17:52 – 17:56 |
Steel slag concrete: thermo-mechanical stability under high-temperature cycles (#30) Ms. Laura Boquera, University of Lleida, Spain |
|||||
|
17:57 – 18:03 |
Modeling of combined convective and close-contact melting in a vertical cylindrical enclosure (#147) Mr. Tomer Shockner, Ben Gurion Universit, Israel |
|||||
|
18:04 – 18:10 |
PCM absorbed exfoliated graphite/polymer composites for thermal management of Lithium-ion batteries (#76) Dr. Manikantan Kota, Pluss Avanced Technologies Pvt.Ltd, India |
|||||
|
18:11 – 18:17 |
Effect of adding expanded graphite microparticles in organic plastic crystals for latent heat storage (#108) Mr. Sergio Santos-Moreno, CIC energiGUNE, Spain |
|||||
|
18:18 – 18:24 |
Preparation of PCL based SS-PCM and shaping using 3D printing (#156) Dr. Camila Barreneche, University of Barcelona, Spain |
|||||
|
18:25 – 18:35 |
Questions
|
|||||
|
16:15 – 18:45 |
Short Oral-Poster session Systems Chairperson: |
|
|
|
16:15 – 16:21 |
Configuration and strategy optimizations for a new distributed energy system combining multi-energy storage techniques (#166) Dr. Zhijian Liu, North China Electric Power University, China |
|
|
16:22 – 16:28 |
An investigation into the use of biomimetic designs for improved efficiency in both solar thermal and solar photovoltaic applications. (#149) Mr. Adam Lunnon-Collery, Trinity College Dublin, Ireland |
|
|
16:29 – 16:35 |
Optimizing Carnot battery configuration for waste heat recovery integrated system with ORC (#177) Mr. Miroslav Rathan, Czech Technical University in Prague, Czech Republic |
|
|
16:36 – 16:42 |
Building stock quantification approach for building retrofit analysis. A case study for PV potential and Energy demand reduction (#178) Prof. Dieter Boer, Universitat Rovira I Virgili, Spain |
|
|
16:43 – 16:49 |
Demand orientated steam generation from phase change material by using a rotating drum heat exchanger (#7) Mr. Jonas Tombrink, German Aerospace Center, Germany |
|
|
16:50 – 16:56 |
Experimental study on the effect of flat and thin slab encapsulation design on a PCM tank (#18) Mr. David Vérez, University of Lleida, Spain |
|
|
16:57 – 17:04 |
Analysis of the behavior of a thermocline tank consists on a packed bed with solid particles (#9) Ms. Minerva Díaz, Castilla-La Mancha University, Spain |
|
|
17:04 – 17:10
|
Low-emission heat supply with heat pumps and hot water storage – Optimal design and operation (#57) Mr. Dimitri Nefodov, Chemnitz University of Technolgy, Germany |
|
|
17:11 – 17:17
|
Use of reinforcement learning to optimize the control of solar thermal collectors coupled to seasonal thermal energy storage (#31) Ms. Alicia Crespo, University of Lleida, Spain |
|
|
17:20– 17:30 |
Questions
|
|
|
17:31 – 17:37 |
Effective thermal conductivity from thermal response tests increases with time when sufficient groundwater flow is present (#136) Mrs. Karoline Kvalsvik, Norwegian University of Science and Technology, Norway |
|
|
17:38 – 17:44 |
Opportunities for BTES in existing buildings – ideas and first results from project GEO4CIVHIC (#126) Dr. Burkhard Sanner, UbeG Dr. Mands & Sauer GbR, Germany |
|
|
17:45 – 17:51 |
Modeling of the total efficiency of hybrid photovoltaic/thermal collector working in the direct solar energy absorption mode (#109) Dr. Artem Nikulin, CIC energiGUNE, Spain |
|
|
17:51 – 17:57 |
Design and build of a novel dual-tube PCM storage unit (#8) Ms. Maike Johnson, German Aerospace Center, Germany |
|
|
17:58 – 18:04 |
Life cycle assessment of an innovative hybrid energy storage system for residential buildings (#28) Ms. Noelia Llantoy, University Of Lleida, Spain |
|
|
18:05 – 18:11 |
Large-scale cold water storage - German state of the art (#42) Prof. Thorsten Urbaneck, Chemnitz University of Technolgy, Germany |
|
|
18:11 – 18:17 |
Numerical simulation of a fluidized bed with concentrated radiation directly on SiC particles (#10) Ms. Minerva Díaz, Castilla-La Mancha University, Spain |
|
|
18:18 – 18:24 |
CFD analysis of large scale high temperature thermal energy storage unit (#139) Mr. Yousif Muhammad, Technical University of Denmark, Denmark |
|
|
18:25 – 18:31 |
Different Cycle Layouts for Pumped Thermal Energy Storage (PTES) Systems with Zeotropic Working Fluids (#96) Mr. Aiko Bernehed, German Aerospace Center, Germany |
|
|
18:33 – 18:45 |
Questions
|
|
|
18:50 – 19:30 |
Welcome / Photo shooting
|
|
Thursday, 10 June 2021
|
9:00 – 10:25 |
Morning session A4 TES applications Chairperson: |
||||
|
9:00 – 9:25 |
Keynote lecture (#223) Phase change materials: is still the starring technology of thermal energy storage? Current applications, perspectives and research gaps Prof. Luisa F. Cabeza University of Lleida, Spain |
||||
|
9:25 – 9:45 |
Experimental characterization of two latent heat storage prototypes for domestic heating application (#11) Ass. Prof. Justin Chiu KTH Royal Institute of Technology, Sweden |
||||
|
9:45 – 10:05 |
Active PCM-based heat storage using biowax and a pillow-plate heat exchanger in a ZEB building (#164) Dr. Alexis Sevault SINTEF Energy Research, Norway |
||||
|
10:05 – 10:25 |
Thermo-economic analysis of cascaded latent-heat stores in pumped thermal electricity storage systems (#36) Dr. Yao Zhao Shanghai Jiao Tong University, China |
||||
|
|
|
||||
|
9:00 – 10:20 |
Morning
session B4
Chairperson: |
||||
|
9:00 – 9:20 |
Simulations and optimization of BTES systems for commercial and non-residential buildings in project geo:base, and validation of BHE simulation (#115) Prof. Dr. Lars Kühl Ubeg Dr. Mands & Sauer GbR, Germany |
||||
|
9:20 – 9:40 |
Methods for the determination of the state-of-charge of a thermal energy storage device (#27) Dr. Gabriel Zsembinszki University of Lleida, Spain |
||||
|
9:40 – 10:00 |
Analysis of the discharging process of latent heat thermal energy storage units by means of normalized power parameters (#94) Dr. Andreas König-Haagen University of the Basque Country UPV/EHU, Spain University of Bayreuth, Germany |
||||
|
10:00 – 10:20 |
Experimental study of AI-based model predictive control strategy for thermal energy storage system (#118) Ms. Doyun Lee University of Tokyo, Japan |
||||
|
|
|
||||
|
9:00 – 10:20 |
Morning session C4 EES applications Chairperson: |
||||
|
9:00 – 9:20 |
Multivalent Batteries and their perspective (#217) Prof. Robert Dominko National Institute of Chemistry, Slovenia |
||||
|
9:20 – 9:40 |
Development of an H2-permeable, PdCu-based, composite membrane by using a reverse build-up method (#102) Mr. Yasunari Shinoda Tokyo Institute of Technology, Japan |
||||
|
9:40 – 10:00 |
Techno-economic evaluation of Brayton Battery configurations with power-to-heat extension (#13) Mr. Sergej Belik German Aerospace Center, Germany |
||||
|
10:00 – 10:20 |
Ni-doped CdS quantum dots sensitized 3D rosette-rod TiO2 photoanodes for photoelectrochemical water splitting (#170) Prof. Gülfeza Kardaş Çukurova University, Turkey |
||||
|
10:20 – 10:45 |
Sponsor chat / Break
|
||||
|
|
|
||||
|
10:45 – 12:25 |
Morning
session A5 Chairperson: |
||||
|
10:45 – 10:05 |
Coupling of building simulation with real time measurements of PCM components - a hardware in the loop approach (#122) Mr. Stephan Vidi ZAE Bayern, Germany |
||||
|
10:05 – 10:25 |
Techno-economic assessment of thermal energy storage systems for small-scale CSP plants running organic Rankine cycles (#3) Dr. Iñigo Ortega-Fernández CIC energiGUNE, Spain |
||||
|
10:25 – 10:45 |
Modeling phase change materials in advanced urban canopy models (#72) Dr. Claudia Fabiani University of Perugia, Italy |
||||
|
11:45 – 12:05 |
An algorithm for optimal selection of thermal energy storage options in industrial waste heat recovery applications (#70) Dr. Giovanni Manente University of Birmingham, United Kingdom |
||||
|
12:05 – 12:25 |
Giga scale pit storage as an essential part of district heating systems (#33) Mr. Keith O'Donovan AEE Intec, Austria |
||||
|
|
|
||||
|
10:45 – 12:25 |
Morning
session B5 Chairperson: |
||||
|
10:45 – 10:05 |
Experimental study of ettringite materials for thermochemical energy storage in buildings (#119) Prof. Frédéric Kuznik CETHIL INSA Lyon, France |
||||
|
10:05 – 10:25 |
Impact of Fe- and La-doping on the thermochemical heat storage capacity of CaMnO3 (#97) Dr. Emanuela Mastronardo Institute of Catalysis and Petrochemistry, Spain University of Messina, Italy |
||||
|
10:25 – 10:45 |
Synthetic strategies for the enhancement of tricalcium aluminate hexahydrate hydrothermal cycling performances (#129) Mr. Fabrizio Alvaro University of Messina, Italy |
||||
|
11:45 – 12:05 |
Development of Co3-xNixO4 (0 ≤ x ≤ 1) materials for thermochemical energy storage at lower red-ox temperature (#35) Ms. Yasmina Portilla CIC energiGUNE, Spain |
||||
|
12:05 – 12:25 |
Thermochemical storage of low-temperature wasted heat by organic salt hydrate material (#117) Dr. Emanuele La Mazza University of Messina, Italy |
||||
|
|
|
||||
|
10:45 – 12:25 |
Morning
session C5 Chairperson: |
||||
|
10:45 – 10:05 |
Industrial byproducts characterization for high temperature solid particle solar tower systems used as thermal energy storage and heat transfer fluid (#213) Dr. Alejandro Calderón University of Barcelona, Spain |
||||
|
10:05 – 10:25 |
The enabling role of nanoparticles in the development of anticorrosion coatings for molten salts thermal energy storage applications (#104) Dr. Luis González-Fernández CIC energiGUNE, Spain |
||||
|
10:25 – 10:45 |
High temperature equilibria in molten nitrate salt – Thermal stability in purged and closed systems (#103) Dr. Alexander Bonk German Aerospace Center, Germany |
||||
|
11:45 – 12:05 |
Hot corrosion resistance of Inconel 600 under molten salts at 675 oC for thermal energy storage tanks. (#160) Mr. Adrià Urban University of Barcelona, Spain |
||||
|
12:05 – 12:25 |
Corrosion study of the use of nitrate molten salt nanofluids in Concentrated Solar Plants (#190) Dr. Helena Navarro University of Birmingham, United Kingdom |
||||
|
|
|
||||
|
12:25 – 12:55 |
Sponsor chat
|
||||
|
12:55 – 14:00 |
Lunch break
|
||||
|
|
|
||||
|
14:00 – 15:40 |
Afternoon
session A6 Chairperson: |
||||
|
14:00 – 14:20 |
Analyzing online news to understand thermal energy storage awareness and acceptance (#73) Prof. Anna Laura Pisello University of Perugia, Italy |
||||
|
14:20 – 14:40 |
Analysis of electricity consumption in Slovenia until 2050 by integrating RES with the role of energy storage technologies (#191) Ass. Prof. Uroš Stritih University of Ljubljana, Slovenia |
||||
|
14:40 – 15:00 |
A techno-economic analysis of compact thermal energy storage technology: energy & cost savings, load-shifting potential, and 2030 cost targets (#207) Mr. Dylan Bardy Natural Resources Canada, Canada |
||||
|
15:00 – 15:20 |
The influence of distinctive urban morphologies on the microclimate in Singapore (#24) Prof. Luisa F. Cabeza University of Lleida, Spain |
||||
|
15:20 – 15:40
|
Role of onsite thermal and electric storage in nZEBs (#14) Dr. Fabian Ochs University of Innsbruck, Austria |
||||
|
|
|
||||
|
14:00 – 15:45 |
Afternoon
session B6 Chairperson: |
||||
|
14:00 – 14:25 |
Keynote lecture (#224) Trends in PCM development – From CalorSTOCK’94 to EnerSTOCK’21 Prof. Halime Paksoy Çukurova University, Turkey |
||||
|
14:25 – 14:45 |
Effect of the processing method in trimethylolethane based composites for thermal energy storage systems (#114) Dr. Ángel Serrano CIC energiGUNE, Spain |
||||
|
14:45 – 15:05 |
Parametric characterization of the variables that influence supercooling on PCMs (#202) Dr. Laura Quant Colón University of the Basque Country UPV/EHU, Spain |
||||
|
15:05 – 15:25 |
Thermal characterisation of the novel Cu-67 wt. % Mg phase change material for thermal storage applications (#66) Dr. Carolina Villada Vargas German Aerospace Center, Germany |
||||
|
15:25 – 15:45 |
Testing the use of UA-values for comparison of two different PCM-heat exchanger (#19) Dr. Dominic Groulx Dalhousie University, Canada |
||||
|
|
|
||||
|
|
|
||||
|
14:00 – 15:40 |
Afternoon session C6 TES applications Chairperson: |
||||
|
14:00 – 14:20 |
Parametric study of the PCM system for space cooling improved with the night-time ventilation for the enhanced solidification (#89) Mrs. Eva Zavrl University of Ljubljana, Slovenia |
||||
|
14:20 – 14:40 |
Promotion of thermal comfort thanks to PCM: also still after 10 years of operation? (#105) Mrs. Tabea Obergfell, Fraunhofer Institute for Solar Energy Systems ISE, Germany |
||||
|
14:40 – 15:00 |
Thermal analysis and simulation of solar building heating systems utilizing heat pumps and phase change energy storage (#50) Dr. José A. Almendros-Ibáñez Castilla-la Mancha University, Spain |
||||
|
15:00 – 15:20 |
Techno-economic evaluation of nitrate salt storage concepts at 620 °C (#107) Mr. Freerk Klasing German Aerospace Center, Germany |
||||
|
15:20 – 15:40 |
Experimental comparison of small-scale and full-scale latent storage for integration in efficient heat pumps (#46) Dr. Gabriel Zsembinszki University of Lleida, Spain |
||||
|
15:45 – 16:15 |
Participant networking / Break
|
||||
|
|
|
||||
|
16:15 – 18:45 |
Short Oral-Poster session TES applications Chairperson: |
||||
|
16:15 – 16:21 |
ASTEP project: development of high temperature thermal energy storage systems for industrial processes (#221) Prof. Ruth Herrero-Martín, Polytechnic University of Cartagena, Spain |
||||
|
16:22 – 16:28 |
Groundwater influence on large-scale hot water tanks and pits for renewables-based district heating systems: technical assessment (#82) Mr. Abdulrahman Dahash, University of Innsbruck, Austria |
||||
|
16:29 – 16:35 |
Experimental analysis of a small size vacuum insulated water tank (#29) Dr. Emiliano Borri, University of Lleida, Spain |
||||
|
16:36 – 16:42 |
Experimental evaluation of a heat pump-latent storage system for increasing renewable share of the residential stock (#44) Dr. Valeria Palomba, CNR ITAE, Italy |
||||
|
16:43 – 16:49 |
Review of thermal energy storage in heat pump systems for heating and cooling (#116) Dr. Eneja Osterman, University of Ljubljana, Slovenia |
||||
|
16:50 – 16:56 |
Modelling very large thermal energy stores - comprehensive comparison of different models (#5) Dr. Fabian Ochs, University of Innsbruck, Austria |
||||
|
16:57 – 17:04 |
Radial diffusers with twist generation for arrow storage tanks – first experimental studies (#40) Prof. Thorsten Urbaneck, Chemnitz University of Technolgy, Germany |
||||
|
17:05 – 17:11
|
Economic optimization of seasonal thermal energy storage systems (#77) Mr. Reto Hendry, Lucerne University of Applied Sciences and Arts, Switzerland |
||||
|
Poster |
Building a predictive model for a heat source system with thermal energy storage using machine learning (#111) Mr. Yuki Matsuda, DAI-DAN Co., Ltd., Japan |
||||
|
17:12– 17:22 |
Questions
|
||||
|
17:22 – 17:28 |
Temperature distribution on directly irradiated spouted beds(#49) Dr. J.A. Almendros-Ibáñez, Castilla-la Mancha University, Spain |
||||
|
17:29 – 17:35 |
Business case improvement of a multi-energy plant containing a wood boiler, an organic Rankine cycle and two thermal energy storage vessels (#38) Mr. Jad Al Koussa, Vito/EnergyVille, Belgium |
||||
|
17:36 – 17:42 |
A study of spacing effect on pool boiling performance of three triangular pitched and vertically oriented tubes (#86) Dr. Artem Nikulin, CIC energiGUNE, Spain |
||||
|
17:43 – 17:49 |
Validation of numerical model for latent thermal storage operation and analysis of heat charge and discharge in TRNSYS (#54) Mr. Rok Koželj, University of Ljubljana, Slovenia |
||||
|
17:50 – 17:56 |
Development and analysis of a CFD results based system simulation model for a latent heat thermal energy storage unit with macro-capsules (#90) Dr. Andreas König-Haagen, University of the Basque Country UPV/EHU, Spain, University of Bayreuth, Germany |
||||
|
17:57 – 18:03 |
Experimental study of a novel three-fluids heat exchanger embedded with phase change materials for cooling applications (#17) Mr. Boniface Dominick Mselle, University of Lleida, Spain |
||||
|
18:04 – 18:10 |
Assessing shallow geothermal energy potential of Balikesir Region, Turkey with different thermal response testing procedures (#222) Ms. Ayse Ö. Dölcek, Turkey |
||||
|
18:10 – 18:20 |
Questions
|
||||
|
|
|
||||
|
16:15 – 18:45 |
Short Oral-Poster session PCM materials Chairperson: |
|
||||
|
16:15 – 16:21 |
Formation mechanism of Al@Al₂O₃ core-shell type microencapsulated phase change material (#134) Mr. Yuto Shimizu, Hokkaido University, Japan |
||||
|
16:22 – 16:28 |
Onset of natural convection during PCM melting (#12) Dr. Dominic Groulx, Dalhousie University, Canada |
||||
|
16:29 – 16:35 |
Characterization of two phase change materials for domestic hot water application (#138) Prof. Laurent Zalewski, Artois University, France |
||||
|
16:36 – 16:42 |
Synthesis of microcapsulated of PCMs with natural shell materials prepared according to green chemistry principles (#171) Mr. Sedat Emir, Çukurova University, Turkey |
||||
|
16:43 – 16:49 |
Thermal contact resistance: implications for thermal energy storage systems (#2) Ms. Veronika Stahl, German Aerospace Center, Germany |
||||
|
16:50 – 16:56 |
Development of a prototype to research on xylitol crystallization by shearing and seeding for its use as a phase change material (#130) Mr. Miguel Navarro, University of Zaragoza, Spain |
||||
|
16:57 – 17:04 |
Possibilities and limitations of PCM development using phase diagrams (#43) Mr. Christoph Rathgeber, ZAE Bayern, Germany |
||||
|
17:04 – 17:10
|
Shape-stabilized phase change materials obtained by single screw extruder for building applications: thermo-physical characterization (#154) Ms. Rebeca Salgado, University of Barcelona, Spain |
||||
|
17:11 – 17:17
|
Sensitivity analysis of examination methods to determine the degradation of erythritol and HD-PE (#196) Mrs. Franziska Klünder, Fraunhofer Institut For Solar Energy Systems ISE, Germany |
||||
|
17:20– 17:30 |
Questions
|
||||
|
17:31 – 17:37 |
Developing PCM-PVA gel composite bio-inspired by whale blubber for TES (#180) Ms. Özge Güngör, Çukurova University, Turkey |
||||
|
17:38 – 17:44 |
Reduction of rotation phase supercooling in nano n-docosanol phase change slurries (#59) Mr. Moritz Kick, Fraunhofer Institute for Solar Energy Systems ISE, Germany |
||||
|
17:45 – 17:51 |
Stability of latent heat storage units: evaluation based on the compatibility tests (#210) Prof. Milan Ostrý, Brno University of Technology, Czech Republic |
||||
|
17:51 – 17:57 |
Own synthetize nano-enhanced fatty acid phase change materials (NEPCM): a comparison of properties (#155) Mr. Marc Majo, University of Barcelona, Spain |
||||
|
17:58 – 18:04 |
Measuring crystallisation rates of phase change materials as a function of supercooling (#84) Mr. Peter Hoock, ZAE Bayern, Germany |
||||
|
18:05 – 18:11 |
Development of microencapsulated phase change materials suitable for fluidized bed thermal energy storage systems (#185) Mrs. Gizem Biçer Göktepe, Çukurova University, Turkey |
||||
|
18:11 – 18:17 |
Thermal characterization of a latent heat thermal energy storage system through an 8.5 kWh experimental prototype (#21) Dr. Raffaele Liberatore, ENEA, Italy |
||||
|
18:18 – 18:24 |
Measuring thermophysical properties for an open-source PCM library (#51) Mr. Lukas Müller, Lucerne University of Applied Sciences and Arts, Switzerland |
||||
|
18:25 – 18:31 |
A review on phase change materials, utilization in the aeronautical field (#125) Mr. Christos Potamitis, University of West Attica, Greece |
||||
|
18:32 – 18:43 |
Questions
|
||||
|
18:45 – 19:15 |
Photo shooting
|
||||
Friday, 11 June 2021
|
9:00 – 10:25 |
Plenary Session P2 Chairperson: |
|
9:00 – 9:45 |
Plenary lecture PL2 100% Renewable smart energy systems Prof. Henrik Lund Aalborg University, Denmark |
|
|
Short break |
|
9:50 – 10:30 |
Morning session A7 TES applications Chairperson: |
|
9:50 – 10:10 |
Carnot-batteries and the decarbonization of coal fired power plants (#150) Prof. Andre Thess German Aerospace Center, Germany |
|
10:10 – 10:30 |
Demonstration of two latent heat storages for industrial solar process heat applications (#195) Dr. Christoph Zauner AIT Austrian Institute of Technology, Austria |
|
|
|
|
9:50 – 10:30 |
Morning session B7 P2X applications Chairperson: |
|
9:50 – 10:10 |
District cooling system optimization with distributed cold storage adopting power-to-cold: a case study on Norrenergi AB (#121) Dr. Saman Nimali Gunasekara KTH Royal Institute of Technology, Sweden |
|
10:10 – 10:30 |
Flexibility of refrigeration systems for grid balancing in Germany (#127) Ms. Dana Laureen Schmidt Fraunhofer Institute for Environmental, Safety, and Energy Technology UMSICHT, Germany |
|
|
|
|
9:50 – 10:30 |
Morning session C7 Sensible materials Chairperson: |
|
9:50 – 10:10 |
Chemisorption at solid-liquid interfaces as a mechanism for enhanced sensible energy storage in nanofluids (#172) Mr. Ivan Carrillo-Berdugo University of Cadiz, Spain |
|
10:10 – 10:30 |
Nanofluids study through infrared thermography and physico-chemical characterization (#157) Ms. Adela Svobodova University of Barcelona, Spain |
|
10:30 – 10:45 |
Participant networking / Break
|
|
|
|
|
10:45 – 12:25 |
Morning
session A8 Chairperson: |
|
10:45 – 11:05 |
Commissioning of high temperature thermal energy storage for high power levels (#4) Ms. Maike Johnson German Aerospace Center, Germany |
|
11:05 – 11:25 |
Enhancing energy density of existing sensible thermal storage system with encapsulated PCM (#53) Mr. Rok Koželj University of Ljubljana, Slovenia |
|
11:25 – 11:45 |
Effect of fluid velocity on storage performance of medium temperature packed-bed thermal energy storage systems (#168) Dr. Burcu Koçak Çukurova University, Turkey |
|
11:45 – 12:05 |
Thermal high performance storages for electric bus heating - overview on the current state of development (#26) Mr. Werner Kraft German Aerospace Center, Germany |
|
12:05 – 12:25 |
An insight into challenges associate with seasonal storage in solar district heating systems (#192) Dr. Mohamed Abokersh University of Rovira i Virgili, Spain |
|
|
|
|
10:45 – 12:25 |
Morning session B8 PCM materials Chairperson: |
|
10:45 – 11:05 |
Hybridisation of latent and thermochemical thermal energy storage: 3 in 1 thermal energy storage (#204) Ms. Anabel Palacios Trujillo University of Birmingham, United Kingdom |
|
11:05 – 11:25 |
Synthesis and characterization of microcapsules based on inorganic@PCM for thermal energy storage at low temperature applications (#193) Dr. Teresa Aguilar University of Cadiz, Spain |
|
11:25 – 11:45 |
Hierarchical macro-nanoporous metals for shape-stabilized phase change materials with high energy capacity, enhanced thermal conductivity and superior antileakage performance (#6) Prof. Yaroslav Grosu CIC energiGUNE, Spain |
|
11:45 – 12:05 |
Evaluation of nitrate salts as storage medium for active latent heat thermal energy storage systems (#71) Dr. Andrea Gutierrez German Aerospace Center, Germany |
|
12:05 – 12:25 |
Compatibility of the novel Cu-67wt.%Mg phase change material in non-inertial thermal storage applications (#37) Dr. Anthony Rawson German Aerospace Center, Germany |
|
|
|
|
10:45 – 12:25 |
Morning
session C8 Chairperson: |
|
10:45 – 11:05 |
Use of a simplified numerical model for the thermal performance evaluation of a tube&shell LHTES (#52) Dr. Daniele Nicolini ENEA, Italy |
|
11:05 – 11:25 |
Life Cycle Assessment (LCA) of concentrating solar power (CSP) plant in tower configuration with and without thermal energy storage (TES) (#63) Mrs. Gemma Gasa University of Lleida, Spain |
|
11:25 – 11:45 |
Impact of PEMFC performance and durability on life cycle environmental impacts (#200) Dr. Rok Stropnik University of Ljubljana, Slovenia |
|
11:45 – 12:05 |
Analyzing Different Thermal Management Systems for Li-ion battery pack - CFD Study (#140) Mr. Yousif Muhammad Technical University of Denmark, Denmark |
|
12:05 – 12:25 |
Multi-scale modelling of the thermal runaway in Li-ion batteries (#194) Prof. Tomaž Katrašnik University of Ljubljana, Slovenia |
|
12:30 – 13.00 |
Participant networking
|
|
13:00 – 14:00 |
Lunch break
|
|
|
|
|
14:00 – 15:00 |
Afternoon session A9 TES applications Chairperson: |
|
14:00 – 14:20 |
Applications of thermal energy storage systems for nearly-zero energy demonstration buildings in China (#165) Dr. Xinyan Yang China Academy Of Building Research, China |
|
14:20 – 14:40 |
Development and demonstration of a Zero-Energy-Sauna (#142) Dr. Micha Schaefer University of Stuttgart, Germany |
|
14:40 – 15:00 |
Developing northern greenhouses : an experimental and numerical studies (#199) Prof. Didier Haillot ÉTS, Canada |
|
|
|
|
14:00 – 15:05 |
Afternoon session B9 P2X/TCM materials Chairperson: |
|
14:00 – 14:25 |
Keynote lecture (#98) Photocatalytic CO2 and CH4 conversion to H2 and CO beyond thermodynamic equilibrium for a possible power to gas application Dr. Petar Djinović National Institute of Chemistry, Slovenia |
|
14:25 – 14:45 |
Thermochemical heat storage through CaO-Mayenite/CaCO3 system: thermal performances comparison for two synthesis methods. (#64) Dr. Raffaele Liberatore ENEA, Italy |
|
14:45 – 15:05 |
Cyclic CO2 hydrate-based cold thermal storage and CO2 gas storage enabled by amine infused hydrogels (#161) Dr. Xiaolin Wang The Australian National University, Australia |
|
|
|
|
14:00 – 15:00 |
Afternoon session C9 PCM materials Chairperson: |
|
14:00 – 14:20 |
Valorization of red mud as a supporting material for medium-high temperature thermal energy storage (#208) Dr. Argyrios Anagnostopoulos University of Birmingham, United Kingdom |
|
14:20 – 14:40 |
Potential new reference materials for caloric measurements on PCM (#68) Dr. Harald Mehling Consultant, Germany |
|
15:10 – 15:30 |
Closing
|
